Differences

This shows you the differences between two versions of the page.

--- router0_config [2022/07/24 19:27] – [Network configuration] bent
+++ router0_config [2022/08/08 15:29] (current) – bent
@@ Line 6: / Line 6: @@
-  # Upstream interface enp0s3 on net0
+  #/etc/systemd/network/enp0s3.network
+  #
   [Match]
   Name=enp0s3
@@ Line 20: / Line 21: @@
 ==== Downstream interface enp0s8 (LAN2) ====
-  # Downstream interface enp0s8 on net2
+  #/etc/systemd/network/enp0s8.network
+  #
   [Match]
   Name=enp0s8
@@ Line 42: / Line 44: @@
   PoolOffset=90
   PoolSize=10
+==== Downstream interface enp0s9 (LAN3) ====
+This interface is configured analogous to enp0s8 except for
+  SubnetId=9
+and
+  Address=192.168.2.1/24
+==== DHCP configuration ====
+  #/etc/dhcp/dhcpd6.conf
+  #
+  ...
+  # The subnet where the server is attached
+  #  (i.e., the server has an address in this subnet)
+  subnet6 2001:2db:8073:e00::/64 {
+          range6 2001:2db:8073:e00::2 2001:2db:8073:e00::9;
+          # Use the whole /64 prefix for temporary addresses
+          #  (i.e., direct application of RFC 4941)
+          range6 2001:2db:8073:e00:: temporary;
+          # Some /64 prefixes available for Prefix Delegation (RFC 3633)
+          prefix6 2001:2db:8073:e10:: 2001:2db:8073:e80:: /60;
+  }