Differences

This shows you the differences between two versions of the page.

--- main_router [2022/07/24 19:08] – [Downstraem interface (br0)] bent
+++ main_router [2022/08/08 15:24] (current) – [DHCPv6 configuration] bent
@@ Line 1: / Line 1: @@
 ====== Configuration files for the Main Router ======
 ===== Network configuration =====
-==== Upstream interface (enp0s6) ====
+==== Upstream interface (enp6s0) ====
 The upstream network interface is configured to act as a DHCP client (both IPv4 and IPv6). It also sets this host as a router and will accept Router Announcements (RA)
+  #/etc/systemd/network/enp6s0.network
+  #
   [Match]
   Name=enp6s0
@@ Line 23: / Line 25: @@
 ====Downstream interface (br0)=====
-This interface sends Router Announcements (RA) on the LAN. The interface itself gets static IPv4 and IPv6 addresses. Hosts on the LAN will use SLAAC and configure addresses as 2001:db8:8073:19::/64 (Sent as an option in the RA - Line 'SubnetID=19')
+This interface sends Router Announcements (RA) on the LAN with the 'Managed' bit set. The interface itself gets static IPv4 and IPv6 addresses. Hosts on the LAN will use SLAAC and configure addresses as 2001:db8:8073:19::/64 (Sent as an option in the RA - Line 'SubnetID=19')
+  #/etc/systemd/network/br0.network
+  #
   [Match]
   Name=br0
@@ Line 53: / Line 57: @@
+  #/etc/dhcp/dhcpd6.conf
+  #
   ...
   # don't serve enp6s0 (WAN IF)